1.0 OBJECTIVE : To confirm that the analysts performing the tests in Quality Control Laboratory (Company Name) are adequately trained to produce reliable and accurate results within the specified parameters. 2.0 SCOPE : This procedure is applicable to assure that the analysts are familiar with all tests, ...

1.0 OBJECTIVE : To set up a procedure for the calibration of Thermostatically controlled water bath. 2.0 SCOPE : This SOP is applicable for calibration of Thermostatically controlled water bath in Quality Control Department of (Company Name). 3.0 RESPONSIBILITY 3.1 QC Officer/Analyst shall carry out ...

1.0 OBJECTIVE : To provide guidelines for the calibration of the Thermometer/Clock/Humidity Meters & Data Loggers. 2.0 SCOPE : This procedure is applicable for the calibration of all the Thermometer/Clock/Humidity Meters & Data Loggers used for monitoring & recording the temperature & ...

1.0 OBJECTIVE : To set up a standardized general procedure to check and calibrate the air sampler. 2.0 SCOPE : This SOP is applicable for calibration and checking the status of the DUO SAS SUPER 360 air sampler. 3.0 RESPONSIBILITY 3.1 Sr. Officer/ Officer shall be responsible for carrying out the procedure. 3.2 Overall ...

1.0 OBJECTIVE To set up a procedure for the operation, cleaning and calibration of Dose Uniformity Sampling Apparatus (DUSA) for DPI. 2.0 SCOPE This SOP is applicable for operation, cleaning and calibration of Dose Uniformity Sampling Apparatus (DUSA) for DPI. 3.0 RESPONSIBILITY 3.1 Operating personnel ...

1.0 OBJECTIVE : To provide a written procedure for the preparation of 70% Isopropyl alcohol . 2.0 SCOPE : This procedure is applicable for the preparation of 70% Isopropyl alcohol used as disinfectant in (Company Name). 3.0 RESPONSIBILITY 3.1 Microbiologist/ QC officer shall be responsible to carry ...

1.0 OBJECTIVE : To set up a procedure for the operation and cleaning of Stability Chamber-VII (Instrument ID: QC/154). 2.0 SCOPE : This SOP is applicable for the operation and cleaning of Stability Chamber-VII (Instrument ID: QC/154). 3.0 RESPONSIBILITY 3.1 Operating personnel is responsible for carrying ...

1.0 OBJECTIVE To set up a general guideline for the operation, cleaning and calibration of Refractometer. 2.0 SCOPE This SOP is applicable for operation, cleaning and calibration of Refractometer (Eq. ID.: QC/156). 3.0 RESPONSIBILITY 3.1 Operating personnel is responsible for carrying out the procedure. 3.2 ...

1.0 OBJECTIVE To set up a general guideline for the operation and calibration of Manual Titrator. 2.0 SCOPE This SOP is applicable for operation and calibration of Manual Titrator, 876 Dosimat plus (Instrument ID: QC/165). 3.0 RESPONSIBILITY 3.1 Operating personnel is responsible for carrying out the ...

1.0 OBJECTIVE To set up a procedure to operate the CITDAS software. 2.0 SCOPE This procedure is applicable for operation of CITDAS software in Quality Control Department of (Company Name). 3.0 RESPONSIBILITY 3.1 QC Officer/Analyst shall be responsible to carry out the activity as per procedure. 3.2 ...