1.0 OBJECTIVE To set up a guideline for the operation, cleaning and calibration of Shaking Water Bath. 2.0 SCOPE This SOP is applicable for the operation, cleaning and calibration of Shaking Water Bath (Model No.: WSB45, Eq. ID.: QC/241). 3.0 RESPONSIBILITY 3.1 Operating personnel is responsible for ...

1.0 OBJECTIVE To provide a general guideline for operation, cleaning and calibration of volumeter. 2.0 SCOPE This SOP is applicable for operatio, cleaning and calibration of volumeter, Model No. EV 2 (Instrument ID.: QC/284). 3.0 RESPONSIBILITY 3.1 Operating personnel is responsible for carrying out ...

1.0 OBJECTIVE To provide a guideline for operation, cleaning and calibration procedure of Kjeldahl apparatus. 2.0 SCOPE This SOP is applicable for the operation, cleaning and calibration procedure of Kjeldahl apparatus (Eq. ID.: QC/220) at Quality Control Department (Company Name). 3.0 RESPONSIBILITY 3.1 ...

1.0 OBJECTIVE To lay down the procedure to be followed in HPLC & GC analysis and documentation. 2.0 SCOPE This SOP is applicable for the procedure to be followed for assay, dissolution, uniformity of dosage units and related substances/impurity by HPLC and for assay & residual solvents by GC. ...

1.0 OBJECTIVE To lay down a procedure for determination of chromatographic peaks as extraneous to determine and evaluate apparently extraneous peaks in chromatographic data obtained from analytical testing and review of chromatography. 2.0 SCOPE This procedure is applicable to the evaluation of chromatographic ...

1.0 OBJECTIVE : To set up a standardized general procedure for the operation of Vortex Mixer used in the microbiology laboratory for the homogeneous mixing of suspension. 2.0 SCOPE : This SOP is applicable for the Vortex Mixer: Model No.: M37610-33. 3.0 RESPONSIBILITY 3.1 Each individual in the laboratory ...

Objective: To set up a general guideline for the operation and cleaning of Double Door Autoclave. Scope: This SOP is applicable for operation and cleaning of Double Door Autoclave which is used for sterilization of media, petri-plate, glassware (e.g. glass rod, conical flasks etc.) filtration funnel, ...

Objective: To provide a written procedure for handling and disposition of materials sourced from existing as well as new supplier. Scope: This SOP shall be applicable for Quality Control Department. Associated Documents 1. Receipt of Samples at Quality Control Laboratory 2. Accelerated Stability Study 3. ...