Testing and release of raw materials

OBJECTIVE : To set up a procedure for testing and release of raw materials for manufacturing of products. SCOPE : This procedure is applicable for testing and release / rejection of raw materials in the quality control laboratory of (Company Name). RESPONSIBILITY : 1. QC Analyst/ Officer shall be responsible ...

Cleaning and sanitation of QC Laboratory

OBJECTIVE : To lay down the general procedure about cleaning and sanitation of Quality Control Department. SCOPE : The SOP is applicable for Quality Control Department of (Company Name). RESPONSIBILITY : 1 Each individual in the laboratory is responsible for carrying out the procedure. 2 Overall responsibility ...

SOP for Operation and cleaning of Stability Chamber

Objective: To set up a procedure for the operation and cleaning of Stability Chamber-II (Instrument ID: QC/039). Scope: This SOP is applicable for the operation and cleaning of Stability Chamber-II (Instrument ID: QC/039). Responsibility 1. Operating personnel is responsible for carrying out the procedure. 2. ...

SOP for Calibration of incubator

1.0 OBJECTIVE : To set up a procedure for the calibration of Incubators. 2.0 SCOPE : This SOP is applicable for calibration of Incubator I, II and III in Quality Control Department of (Company Name). 3.0 RESPONSIBILITY 3.1 QC Officer/Analyst shall carry out the activity as per procedure. 3.2 Overall ...

SOP for Spillage clening

1.0 OBJECTIVE : To lay down the general procedure for cleaning of solvent and chemical spillage that happened during the work in laboratory to minimize risks hazards and ensures personal safety. 2.0 SCOPE : This SOP is applicable for Quality Control Department of (Company Name) for cleaning of spillage ...

SOP for In- house microbiological analysis of Raw material and finished product

Objective: To lay down a procedure for setting the frequency of in-house microbial test for raw materials and finished products. Scope: This SOP is applicable for all the raw materials used and finished products produced in (Company Name). Responsibility: =>> Microbiologists are responsible for carrying ...

SOP for Calibration of High Vacuum Pump Master

1.0 OBJECTIVE : To set up a procedure for the calibration of High Vacuum Pump and digital flow meter. 2.0 SCOPE : This SOP is applicable for calibration of High Vacuum Pumps and digital flow meters which are installed in Quality Control Department of (Company Name). 3.0 RESPONSIBILITY 3.1 QC Officer/Analyst ...

SOP for Calibration of Doses Uniformity Sampling Apparatus

1.0 OBJECTIVE : To set up a procedure for the calibration of Dose Uniformity Sampling Apparatus. 2.0 SCOPE : This procedure is applicable for the calibration of Dose Uniformity Sampling Apparatus in Quality Control Department of (Company Name). 3.0 RESPONSIBILITY 3.1 QC Officer/Analyst shall be responsible ...

SOP for Acceptance of analytical results form suppliers CoA

1.0 OBJECTIVE : To provide guidelines for acceptance of supplier’s results on certificate of analysis. 2.0 SCOPE : This procedure is applicable to release of raw materials, where there is no or insufficient testing facility for all test parameters to determine the quality of the material. 3.0 RESPONSIBILITY 3.1 It ...

SOP for Operation of DUO SAS SUPER 360 Air sampler

1.0 OBJECTIVE : To set up a standardized general procedure to check and calibrate the air sampler. 2.0 SCOPE : This SOP is applicable to operate the DUO SAS SUPER 360 air sampler. 3.0 RESPONSIBILITY 3.1 Sr. QC Officer/ QC Officer shall be responsible for carrying out the procedure. 3.2 Overall responsibility ...
© 2024 Pharmaceuticals Index. All rights reserved.