1.0 OBJECTIVE : To set up a standardized general procedure to check and calibrate the air sampler. 2.0 SCOPE : This SOP is applicable for calibration and checking the status of the air sampler, MAS 100 NT. 3.0 RESPONSIBILITY 3.1 Sr. Officer/ Officer shall be responsible for carrying out the procedure. 3.2 Overall ...

Objective: To lay down the procedure for approval of disinfectants for its intended use. Scope: This procedure is applicable to approve / reject the disinfectants. Responsibility = >> QC / QA officer shall be responsible to perform the activity as per procedure. = >> Manager, QC shall be responsible ...

1.0 OBJECTIVE : To provide guidelines for acceptance of supplier’s results on certificate of analysis. 2.0 SCOPE : This procedure is applicable to release of raw materials, where there is no or insufficient testing facility for all test parameters to determine the quality of the material. 3.0 RESPONSIBILITY 3.1 It ...

Objective: To set up a procedure for the Regeneration of Silica Gel. Scope: This SOP is applicable for the Regeneration of Silica Gel, in the Quality Control Department of (Company Name). Responsibility 1. Responsible Officer / Sr. Officer/Asst. Manager in the laboratory is responsible for carrying ...

1.0 OBJECTIVE : To set up a standardized general procedure to check and calibrate the air sampler. 2.0 SCOPE : This SOP is applicable to operate the DUO SAS SUPER 360 air sampler. 3.0 RESPONSIBILITY 3.1 Sr. QC Officer/ QC Officer shall be responsible for carrying out the procedure. 3.2 Overall responsibility ...

1.0 OBJECTIVE : To set up the operation and maintenance procedure for Thermometer/Clock/Humidity meter. 2.0 SCOPE : This SOP is applicable for the operation and maintenance procedure of Thermometer/Clock/Humidity Meter at Quality Control Department of (Company Name). 3.0 RESPONSIBILITY 3.1 Operating ...

1.0 OBJECTIVE : To set up the operation and maintenance procedure for Temperature-Humidity Data logger. 2.0 SCOPE : This SOP is applicable for the operation and maintenance procedure of Temperature-Humidity Data logger (Model No.: OM-EL-USB-2-LCD & OM-EL-USB-2-LCD-PLUS) at Quality Control Department ...

1.0 OBJECTIVE : To provide a general guideline for operation and function checking of Analytical Balance. 2.0 SCOPE : This SOP is applicable for operation and function checking of Analytical Balance, Model No. AB 204-S/FACT (Instrument ID.: QC/122). 3.0 RESPONSIBILITY 3.1 Operating personnel is responsible ...

Objective: To set up a procedure for the operation and cleaning of Stability Chamber-III (Instrument ID: QC/040). Scope: This SOP is applicable for the operation and cleaning of Stability Chamber-III (Instrument ID: QC/040). Responsibility: 1. Operating personnel is responsible for carrying out the procedure. 2. ...

1.0 OBJECTIVE : To set up a procedure for the operation and cleaning of Cyclic Temperature Stability Chamber-V (Instrument ID: QC/137). 2.0 SCOPE : This SOP is applicable for the operation and cleaning of Cyclic Temperature Stability Chamber-V (Instrument ID: QC/137). 3.0 RESPONSIBILITY 3.1 Operating ...