1.0 OBJECTIVE : To describe the procedures and guideline for preparation of Reagents, Solutions and Indicators and their maintenance in Quality control department. 2.0 SCOPE : This procedure is applicable for preparation of required reagents, solutions (such as mobile phase, diluents etc) and indicators ...

1.0 OBJECTIVE : To set up a standardized general procedure for the validation and routine monitoring of Laminar Air Flow workstation this ensures an aseptic microbiological working area. 2.0 SCOPE : This SOP is applicable for the validation and routine monitoring of Laminar Air Flow Workstation. 3.0 RESPONSIBILITY 3.1 Operating ...

1.0 OBJECTIVE : To lay down the general procedure for cleaning of solvent and chemical spillage that happened during the work in laboratory to minimize risks hazards and ensures personal safety. 2.0 SCOPE : This SOP is applicable for Quality Control Department of (Company Name) for cleaning of spillage ...

1.0 OBJECTIVE : To set up a procedure for the operation of Single Stage Impactor. 2.0 SCOPE : This SOP is applicable for the operation of Single Stage Impactor. 3.0 RESPONSIBILITY 3.1 Operating personnel is responsible for carrying out the procedure. 3.2 Overall responsibility for training, implementation ...

1.0 OBJECTIVE : To set up a procedure for the operation and calibration of SHIMADZU HPLC Systems. 2.0 SCOPE : This procedure is applicable for the operation and calibration of SHIMADZU HPLC Systems (Prominence with PDA Detector, Prominence with UV Detector and 20ACHT series) in Quality Control Department ...

1.0 OBJECTIVE : To provide a guideline for operation and calibration of Digimatic Micrometer (Model No.: MDC-1″ PJ). 2.0 SCOPE : This SOP is applicable for operation and calibration of Digimatic Micrometer (Model No.: MDC-1″ PJ). 3.0 RESPONSIBILITY 3.1 QC Officer/Analyst shall carry out the activity ...

Objective : To set up a general guideline for the operation and cleaning of memmert Oven. Scope : This SOP is applicable for the operation and cleaning of memmert Oven. Responsibility: =>> Operating personnel is responsible for carrying out the procedure. =>> Overall responsibility for training, ...

Objective: To lay down a procedure for setting the frequency of in-house microbial test for raw materials and finished products. Scope: This SOP is applicable for all the raw materials used and finished products produced in (Company Name). Responsibility: =>> Microbiologists are responsible for carrying ...

1.0 OBJECTIVE : To set up a procedure for the calibration of High Vacuum Pump and digital flow meter. 2.0 SCOPE : This SOP is applicable for calibration of High Vacuum Pumps and digital flow meters which are installed in Quality Control Department of (Company Name). 3.0 RESPONSIBILITY 3.1 QC Officer/Analyst ...

1.0 OBJECTIVE : To set up a procedure for the calibration of Dose Uniformity Sampling Apparatus. 2.0 SCOPE : This procedure is applicable for the calibration of Dose Uniformity Sampling Apparatus in Quality Control Department of (Company Name). 3.0 RESPONSIBILITY 3.1 QC Officer/Analyst shall be responsible ...