Objective: To set up a procedure for the operation and cleaning of Stability Chamber-II (Instrument ID: QC/039). Scope: This SOP is applicable for the operation and cleaning of Stability Chamber-II (Instrument ID: QC/039). Responsibility 1. Operating personnel is responsible for carrying out the procedure. 2. ...

1.0 OBJECTIVE : To set up a general guideline for the operation and cleaning of Vertical Autoclave. 2.0 SCOPE : This SOP is applicable for the operation and cleaning of Vertical Autoclave which is used for decontamination/sterilization of disposed wastes (e.g. media, culture, used plastic Petri dish,) ...

1.0 OBJECTIVE : To set up a standardized general procedure for the operation and cleaning of Laminar Air Flow workstation, which ensures an aseptic microbiological working area. 2.0 SCOPE : This SOP is applicable for operation and cleaning of Laminar Air Flow Workstation. 3.0 RESPONSIBILITY 3.1 Operating ...

1.0 OBJECTIVE : To set up a general guideline for the operation and cleaning of Incubator. 2.0 SCOPE : This SOP is applicable for operation and cleaning of Bacteriological Incubator I, II & III. 3.0 RESPONSIBILITY 3.1 Operating personnel is responsible for carrying out the procedure. 3.2 Overall ...

1.0 OBJECTIVE : To set up a standardized general procedure for the operation and cleaning of colony counters. 2.0 SCOPE : This SOP is applicable for operation and cleaning of Colony Counter-I and II, Model-SC6. 3.0 RESPONSIBILITY 3.1 Operating personnel is responsible for carrying out the procedure. 3.2 Overall ...

1.0 OBJECTIVE : To provide a general guideline for operation and function checking of Precision Balance. 2.0 SCOPE : This SOP is applicable for operation and function checking of Precision Balance, Model No. PB 602-L. 3.0 RESPONSIBILITY 3.1 Operating personnel is responsible for carrying out the procedure. 3.2 Overall ...

Objective: To describe the procedure for receiving, handling, inspection and storage of glassware, used for analysis in Quality control laboratory. Scope: This procedure is applicable for all types of glassware (e.g. volumetric flask, pipette, conical flask, measuring cylinder etc) purchased and used ...

1.0 OBJECTIVE : To set up a procedure for the calibration of Incubators. 2.0 SCOPE : This SOP is applicable for calibration of Incubator I, II and III in Quality Control Department of (Company Name). 3.0 RESPONSIBILITY 3.1 QC Officer/Analyst shall carry out the activity as per procedure. 3.2 Overall ...

1.0 OBJECTIVE : To describe procedure for Validation of Autoclave used in microbiology laboratory. 2.0 SCOPE : This procedure is applicable for validation of Double Door Autoclave(QC/031) and Vertical Autoclave(QC/032) installed in Microbiology Laboratory at (Company Name). 3.0 RESPONSIBILITY 3.1 Microbiologist ...

1.0 OBJECTIVE : To describe procedure for validation of Hot Air Sterilizer. 2.0 SCOPE : This procedure is applicable for the validation of Hot Air Sterilizer installed in Microbiology Laboratory at (Company Name) 3.0 RESPONSIBILITY 3.1 Microbiologist /Quality control officer and Sr. Engineer shall be ...