Objective: To establish a standard operating procedure for Dehumidifier (DHU) Scope: This SOP is applicable for all the DHUs (Bry Air, Model: MVB 15BS, MVB 15B, FVB –3000, FLC-6200, FLC-5000 and FLC-2500) of (Company Name) Responsibility: 1. Operator shall be Responsible to follow the procedure strictly. 2. ...

Objective: To establish a standard procedure for checking the air velocity. Scope: This SOP is applicable for checking the air velocity in the rooms catered by the HVAC system of (Company Name). Responsibility: 1. Maintenance Engineer shall be responsible to follow the procedure strictly. 2. Supervisor ...

Objective: To establish a standard procedure for replacement of HEPA filters Scope: This procedure is applicable for replacement of HEPA filters at HVAC system, (Company Name) Responsibility: 1. Operator shall be responsible to follow the procedure strictly. 2. Supervisor shall be responsible to ensure ...

There is no official standard for writing SOPs but some important steps should be kept in mind while writing SOPs. =>> SOP should be written in word document or google document. =>> Use the same formatting style to write all SOPs in an organization. =>> Use font size, font style and margins etc. as per ...

=>> Dress change procedure for entrance and exit of warehouse =>> Receiving of raw materials and primary packaging materials =>> Labeling of Raw materials and Packaging materials =>> Assigning location number at Warehouse =>> Issue,Transfer and return of Raw Materials for dispensing =>> Procedure to ...

To lay down the procedure for facility qualification Responsibility: > Engineering Manager or his/her designee will be responsible for initiating facility qualification. > Validation manager will be responsible for checking sufficiency in protocols and reports and requirement of facility qualification ...

To describe a procedure about self-reporting by an employee when he/she is suffering from infectious diseases and open lesions. And to prevent personnel known to be suffering from, or known to be carriers of a disease transmission through contact, from working in factory areas. Responsibilities > Employees ...

Objective: To set up a procedures for crimping strength test for all semi-finished products. Scope: This procedure is applicable for semi-finished products manufactured at MDI unit, (Company Name). Responsibility: 1. IPQA Officer shall be responsible for sampling and testing of semi-finished products ...

Objectives: To set up a general and practical approach on safe microbiological practices for all persons involved with microbiological quality control. Scope: This SOP is applicable for all persons involved with the microbiological exercise in the laboratory. Resopnsibility: 1. All personnel involved ...

1. Departmental Organogram 2. Job responsibilities for newly joined employees are available 3. Adequate number of personnel is available 4. Prohibited in working area for Smoking, Chewing tobacco, Eating 5. Access to area is restricted 6. SOPs i) Sop available for carrying out all the important activities ...