1.0 OBJECTIVE : To set up a standardized general procedure for the operation and cleaning of Laminar Air Flow workstation, which ensures an aseptic microbiological working area. 2.0 SCOPE : This SOP is applicable for operation and cleaning of Laminar Air Flow Workstation. 3.0 RESPONSIBILITY 3.1 Operating ...

1.0 OBJECTIVE : To set up a general guideline for the operation and cleaning of Incubator. 2.0 SCOPE : This SOP is applicable for operation and cleaning of Bacteriological Incubator I, II & III. 3.0 RESPONSIBILITY 3.1 Operating personnel is responsible for carrying out the procedure. 3.2 Overall ...

1.0 OBJECTIVE : To set up a standardized general procedure for the operation and cleaning of colony counters. 2.0 SCOPE : This SOP is applicable for operation and cleaning of Colony Counter-I and II, Model-SC6. 3.0 RESPONSIBILITY 3.1 Operating personnel is responsible for carrying out the procedure. 3.2 Overall ...

1.0 OBJECTIVE : To provide a general guideline for operation and function checking of Precision Balance. 2.0 SCOPE : This SOP is applicable for operation and function checking of Precision Balance, Model No. PB 602-L. 3.0 RESPONSIBILITY 3.1 Operating personnel is responsible for carrying out the procedure. 3.2 Overall ...

1.0 OBJECTIVE : To set up a procedure for the calibration of Incubators. 2.0 SCOPE : This SOP is applicable for calibration of Incubator I, II and III in Quality Control Department of (Company Name). 3.0 RESPONSIBILITY 3.1 QC Officer/Analyst shall carry out the activity as per procedure. 3.2 Overall ...

1.0 OBJECTIVE : To describe procedure for Validation of Autoclave used in microbiology laboratory. 2.0 SCOPE : This procedure is applicable for validation of Double Door Autoclave(QC/031) and Vertical Autoclave(QC/032) installed in Microbiology Laboratory at (Company Name). 3.0 RESPONSIBILITY 3.1 Microbiologist ...

1.0 OBJECTIVE : To describe procedure for validation of Hot Air Sterilizer. 2.0 SCOPE : This procedure is applicable for the validation of Hot Air Sterilizer installed in Microbiology Laboratory at (Company Name) 3.0 RESPONSIBILITY 3.1 Microbiologist /Quality control officer and Sr. Engineer shall be ...

1.0 OBJECTIVE : To describe the procedures and guideline for preparation of Reagents, Solutions and Indicators and their maintenance in Quality control department. 2.0 SCOPE : This procedure is applicable for preparation of required reagents, solutions (such as mobile phase, diluents etc) and indicators ...

1.0 OBJECTIVE : To set up a standardized general procedure for the validation and routine monitoring of Laminar Air Flow workstation this ensures an aseptic microbiological working area. 2.0 SCOPE : This SOP is applicable for the validation and routine monitoring of Laminar Air Flow Workstation. 3.0 RESPONSIBILITY 3.1 Operating ...

1.0 OBJECTIVE : To lay down the general procedure for cleaning of solvent and chemical spillage that happened during the work in laboratory to minimize risks hazards and ensures personal safety. 2.0 SCOPE : This SOP is applicable for Quality Control Department of (Company Name) for cleaning of spillage ...