1.0 OBJECTIVE : To set up a procedure for the operation of Single Stage Impactor. 2.0 SCOPE : This SOP is applicable for the operation of Single Stage Impactor. 3.0 RESPONSIBILITY 3.1 Operating personnel is responsible for carrying out the procedure. 3.2 Overall responsibility for training, implementation ...

1.0 OBJECTIVE : To set up a procedure for the operation and calibration of SHIMADZU HPLC Systems. 2.0 SCOPE : This procedure is applicable for the operation and calibration of SHIMADZU HPLC Systems (Prominence with PDA Detector, Prominence with UV Detector and 20ACHT series) in Quality Control Department ...

1.0 OBJECTIVE : To provide a guideline for operation and calibration of Digimatic Micrometer (Model No.: MDC-1″ PJ). 2.0 SCOPE : This SOP is applicable for operation and calibration of Digimatic Micrometer (Model No.: MDC-1″ PJ). 3.0 RESPONSIBILITY 3.1 QC Officer/Analyst shall carry out the activity ...

Objective : To set up a general guideline for the operation and cleaning of memmert Oven. Scope : This SOP is applicable for the operation and cleaning of memmert Oven. Responsibility: =>> Operating personnel is responsible for carrying out the procedure. =>> Overall responsibility for training, ...

Objective: To lay down a procedure for setting the frequency of in-house microbial test for raw materials and finished products. Scope: This SOP is applicable for all the raw materials used and finished products produced in (Company Name). Responsibility: =>> Microbiologists are responsible for carrying ...

1.0 OBJECTIVE : To set up a procedure for the calibration of High Vacuum Pump and digital flow meter. 2.0 SCOPE : This SOP is applicable for calibration of High Vacuum Pumps and digital flow meters which are installed in Quality Control Department of (Company Name). 3.0 RESPONSIBILITY 3.1 QC Officer/Analyst ...

1.0 OBJECTIVE : To set up a procedure for the calibration of Dose Uniformity Sampling Apparatus. 2.0 SCOPE : This procedure is applicable for the calibration of Dose Uniformity Sampling Apparatus in Quality Control Department of (Company Name). 3.0 RESPONSIBILITY 3.1 QC Officer/Analyst shall be responsible ...

Objective: To lay down the procedure for approval of disinfectants for its intended use. Scope: This procedure is applicable to approve / reject the disinfectants. Responsibility = >> QC / QA officer shall be responsible to perform the activity as per procedure. = >> Manager, QC shall be responsible ...

1.0 OBJECTIVE : To provide guidelines for acceptance of supplier’s results on certificate of analysis. 2.0 SCOPE : This procedure is applicable to release of raw materials, where there is no or insufficient testing facility for all test parameters to determine the quality of the material. 3.0 RESPONSIBILITY 3.1 It ...

Objective: To set up a procedure for the Regeneration of Silica Gel. Scope: This SOP is applicable for the Regeneration of Silica Gel, in the Quality Control Department of (Company Name). Responsibility 1. Responsible Officer / Sr. Officer/Asst. Manager in the laboratory is responsible for carrying ...