1.0 OBJECTIVE: To lay down a procedure for Laboratory Cleaning. 2.0 SCOPE: This SOP shall be applicable to Chemical & Instrument section of Quality Control Laboratory. 3.0 RESPONSIBILITY Execution – Laboratory Attendant Checking – Executive and all above 4.0 ACCOUNTABILITY Manager Quality ...

1.0 OBJECTIVE: To lay down the procedure for Daily Work Allotment. 2.0 SCOPE: This SOP is applicable for Daily Work Allotment in Quality Control Department. 3.0 RESPONSIBILITY: Officer, Executive– Quality Control Department. Head – Quality Control Department. 4.0 PROCEDURE: 4.1 Section Head of each ...

OBJECTIVE : To set up a procedure for testing and release of raw materials for manufacturing of products. SCOPE : This procedure is applicable for testing and release / rejection of raw materials in the quality control laboratory of (Company Name). RESPONSIBILITY : 1. QC Analyst/ Officer shall be responsible ...

OBJECTIVE : To lay down the general procedure about cleaning and sanitation of Quality Control Department. SCOPE : The SOP is applicable for Quality Control Department of (Company Name). RESPONSIBILITY : 1 Each individual in the laboratory is responsible for carrying out the procedure. 2 Overall responsibility ...

Objective : To set up a general guideline for the operation and cleaning of Hot Air Sterilizer. Scope : This SOP is applicable for operation and cleaning of Hot Air Sterilizer. Responsibility > Operating personnel is responsible for carrying out the procedure. > Overall responsibility for training, ...

1.0 OBJECTIVE : To set up a standardized general procedure to check and calibrate the air sampler. 2.0 SCOPE : This SOP is applicable for calibration and checking the status of the air sampler, MAS-100NT. 3.0 RESPONSIBILITY 3.1 Sr. QC Officer/ QC Officer shall be responsible for carrying out the procedure. 3.2 Overall ...

1.0 OBJECTIVE : To set up a guideline for the operation and cleaning of Thermostatically Controlled Water Bath. 2.0 SCOPE : This SOP is applicable for the operation and cleaning of Thermostatically Controlled Water Bath. 3.0 RESPONSIBILITY 3.1 Operating personnel is responsible for carrying out the procedure. 3.2 Overall ...

Objective: To set up a procedure for the operation and cleaning of Stability Chamber-II (Instrument ID: QC/039). Scope: This SOP is applicable for the operation and cleaning of Stability Chamber-II (Instrument ID: QC/039). Responsibility 1. Operating personnel is responsible for carrying out the procedure. 2. ...

1.0 OBJECTIVE : to lay down a procedure for proper disposal of used media plates and culture tubes and to prevent contamination & cross contamination and to maintain proper biological safety of laboratory and environment. 2.0 SCOPE : This SOP is applicable for Microbiological Laboratory of Quality ...

1.0 OBJECTIVE : To set up a general guideline for the operation and cleaning of Vertical Autoclave. 2.0 SCOPE : This SOP is applicable for the operation and cleaning of Vertical Autoclave which is used for decontamination/sterilization of disposed wastes (e.g. media, culture, used plastic Petri dish,) ...