OBJECTIVE : To lay down the general procedure about cleaning and sanitation of Quality Control Department. SCOPE : The SOP is applicable for Quality Control Department of (Company Name). RESPONSIBILITY : 1 Each individual in the laboratory is responsible for carrying out the procedure. 2 Overall responsibility ...

1.0 OBJECTIVE To define the handling and transfer procedure of finished goods. 2.0 SCOPE This SOP is applicable for the finished goods of MDI Unit. 3.0 RESPONSIBILITY 3.1 Production officer is responsible to handle and transfer of finished goods. 4.0 ACCOUNTABILITY 4.1 Sr. Manager Production or ...

1.0 OBJECTIVE To define a standard cleaning procedure for consistent cleaning of utensils used for dispensing of raw material. 2.0 SCOPE This SOP is applicable for the utensils used for dispensing of raw material in MDI unit of (Company Name). 3.0 RESPONSIBILITY 3.1 Production officer is responsible ...

1.0 OBJECTIVE To describe the procedure for line sign-off and material verification prior to a production operation 2.0 SCOPE This procedure applies to all production operations including packaging and labeling to ensure that the correct materials, documents, and other requirements are in place prior ...

1.0 OBJECTIVE: To lay down the procedure for charge hand over between shifts. 2.0 SCOPE: This procedure is applicable for charge hand over between the shifts in production department. 3.0 RESPONSIBILITY: Production: Officer /Executive/Assistant Manager. Head Production: To ensure execution & compliance. 4.0 ...

1.0 OBJECTIVE: To lay down a procedure for operation of Bin washing and Drying Machine (Cybernetik). 2.0 SCOPE: This procedure is applicable to operation of Bin washing and Drying Machine (Cybernetik) in granulation area. 3.0 RESPONSIBILITY: Production: Technical associate/Officer /Executive/Assistant ...

1.0 OBJECTIVE: To lay down a procedure for cleaning of Lifting and Positioning Device for RMG (Make:SAAN) 2.0 SCOPE: This procedure is applicable to cleaning of Lifting and Positioning Device for RMG in granulation area. (Make: SAAN) 3.0 RESPONSIBILITY: Production : Technical Associate/ Officer /Executive/Assistant ...

1.0 OBJECTIVE : To lay down a procedure for Handling of Feeding Area. 2.0 SCOPE : This procedure is applicable to the o Handling of Feeding Area in …….. 3.0 RESPONSIBILITY: Production: Technical associate/Officer /Executive/Assistant Manager. Head Production: To ensure execution & compliance. Head ...

1.0 OBJECTIVE: To lay down the procedure for Cleaning and challenge test of Solid Flow Monitor for Fluidized Bed Dryer. 2.0 SCOPE: This procedure is applicable to Cleaning and challenge test of Solid Flow Monitor for Fluidized Bed Dryer in granulation area. 3.0 RESPONSIBILITY: Production: Technical Associate/Officer ...

1.0 OBJECTIVE: To describe a procedure for the operation of air compressor and air dryer. 2.0 SCOPE This procedure applies to the Engineering department. 3.0 RESPONSIBILITY Engineering 4.0 ACCOUNTABILITY Plant head. 5.0 REFERENCE (S) In-house. 6.0 PROCEDURE 6.1 Pre Start Checks: 6.1.1 Check the level ...