1.0 Objective To establish a procedure for handling socks worn in Production area. 2.0 Scope This SOP shall be applicable for Production, Engineering, Quality Assurance and Quality Control Department. 3.0 Associated Documents 3.1 SOP: Laundering Attires of Different Areas 3.2 SOP: Dress Requirement and ...

1.0 Objective To provide guidelines for the transfer of analytical methods for testing of raw materials and finished products to site laboratories where the routine testing shall be carried out including the training of the concerned analyst and proper documentation. 2.0 Scope This procedure is applicable ...

OBJECTIVE: This Standard Operating Procedure is to describe that room can not randomly selected and directly used without verification. It is essential to ensure the suitability of room for a specific activity against requirement. Hence it is to be qualified before use. SCOPE: This procedure is applicable ...

1.0 OBJECTIVE: To lay down a procedure for Civil Work Permit. 2.0 SCOPE: This SOP is applicable for Civil Work Permit for any maintenance in the plant premises. 3.0 RESPONSIBILITY: Officer / Executive – EHS 4.0 ACCOUNTABILITY: Head – EHS 5.0 ABBREVIATIONS: SOP: Standard Operating Procedure No.: ...

1. OBJECTIVE To lay down the procedure for opening and closing of Warehouse. 2. SCOPE This standard operating procedure is applicable for the opening & closing of Warehouse of pharmahub Ltd Unit-I, Roorkee. 3. RESPONSIBILITY Jr. officer/ officer/ Warehouse Executive 4. ACCOUNTABILITY Warehouse ...

OBJECTIVE To review the Quality Management System implementation status and to plan for resolving any outstanding issue and for closing the gaps. SCOPE This SOP is applicable for holding Quality Management Review meeting system in (Company Name). RESPONSIBILITY 1. Team members of concerned departments ...

OBJECTIVE: To lay down a procedure for handling of Out of Trend (OOT) results during testing of routine and stability samples in Laboratory and during review of Annual product quality, water trends and environmental monitoring trends in Quality Assurance. SCOPE : This procedure is applicable to tests ...

OBJECTIVE The objective of carrying out Product Quality Review (PQR) is to establish that the product is manufactured as per approved procedures and the trends of results of critical quality attributes are well within acceptable limits. PQR will also address the review of raw and primary packaging materials ...

OBJECTIVE : To set up a procedure for testing and release of raw materials for manufacturing of products. SCOPE : This procedure is applicable for testing and release / rejection of raw materials in the quality control laboratory of (Company Name). RESPONSIBILITY : 1. QC Analyst/ Officer shall be responsible ...

OBJECTIVE : To lay down the procedure for preparation of certificate of analysis for product/material of Quality Control Department. SCOPE : This SOP is applicable for Quality Control Departments of (Company Name). RESPONSIBILITY : 1. Each individual in the laboratory is responsible for carrying out ...