1.0 OBJECTIVE: To lay down the procedure for the operation and cleaning of Vernier Caliper. 2.0 SCOPE: This procedure is applicable to the operation and cleaning of Vernier Caliper used in production department. 3.0 RESPONSIBILITY: Production: Technical Associate/Officer /Executive/Assistant Manager Head ...

1.0 OBJECTIVE: To lay down the procedure for Cleaning and challenge test of Solid Flow Monitor for Fluidized Bed Dryer. 2.0 SCOPE: This procedure is applicable to Cleaning and challenge test of Solid Flow Monitor for Fluidized Bed Dryer in granulation area. 3.0 RESPONSIBILITY: Production: Technical Associate/Officer ...

1.0 OBJECTIVE: To lay down a procedure for cleaning of Lifting and Positioning Device for RMG (Make: SAAN) 2.0 SCOPE: This procedure is applicable to cleaning of Lifting and Positioning Device for RMG in granulation area. (Make: SAAN) 3.0 RESPONSIBILITY: Production : Technical Associate/ Officer /Executive/Assistant ...

1.0 OBJECTIVE: To lay down a procedure for Handling of Feeding Area. 2.0 SCOPE: This procedure is applicable to the o Handling of Feeding Area in …….. 3.0 RESPONSIBILITY: Production: Technical associate/Officer /Executive/Assistant Manager. Head Production: To ensure execution & compliance. Head ...

OBJECTIVE: The Objective of this SOP is to describe the procedure for cleaning of Wet Scrubber. To ensure Proper maintenance of Wet Scrubber. SCOPE: This SOP is to describe the procedure for cleaning of Wet Scrubber. RESPONSIBILITY 4.1 The Operator shall be: 4.1.1 Responsible for cleaning of Wet Scrubber. 4.1.2 ...

1.0 OBJECTIVE: To lay down the procedure for charge hand over between shifts. 2.0 SCOPE: This procedure is applicable for charge hand over between the shifts in production department. 3.0 RESPONSIBILITY: Production: Officer /Executive/Assistant Manager. Head Production: To ensure execution & compliance. 4.0 ...

1.0 OBJECTIVE: To lay down the procedure for the cleaning of split AC. 2.0 SCOPE: This SOP is applicable for the cleaning of split AC. 3.0 RESPONSIBILITY : Technician / Engineer. Head of Department – Engineering. 4.0 PROCEDURE: 4.1 Switch ‘OFF’ the mains supply of the split AC. 4.2 Remove the ...

OBJECTIVE: To lay down a standard procedure for operation of Air Handling Unit. SCOPE: This SOP covers complete smooth operation of Air Handling Unit. RESPONSIBILITY: AC Technician, Officer and Executive. ACCOUNTABILITY: Head – Engineering. REFERENCES: In House ATTACHMENTS: Nil PROCEDURE 1.0 STARTING ...

OBJECTIVE: The Objective of this SOP is To describe the procedure for Calibration Of Pressure Gauges. SCOPE: This SOP is applicable for the calibration of Pressure Gauge installed in manufacturing & Other Facilities of RESPONSIBILITY: The Maintenance Engineer shall be: Responsible for Calibration ...

OBJECTIVE: To laydown standard procedure for cleaning of AHU FILTERS. SCOPE: This SOP covers all the microvee filters for all AHU. RESPONSIBILITY: Contractor, Operator, Officer and Executive. ACCOUNTABILITY: Head – Engineering. REFERENCES: In house ATTACHMENTS: Attachment-1 FILTER CLEANING RECORD PROCEDURE 1.0 ...