1.0 OBJECTIVE : To provide guidelines for the calibration of the Thermometer/Clock/Humidity Meters & Data Loggers. 2.0 SCOPE : This procedure is applicable for the calibration of all the Thermometer/Clock/Humidity Meters & Data Loggers used for monitoring & recording the temperature & ...

1.0 OBJECTIVE : To lay down the procedure for the calibration of the standard weights / stones used for the calibration & routine function check of the weighing balance. 2.0 SCOPE : This SOP is applicable for the calibration of the standard weights / stones used in Quality Control, Quality Assurance, ...

1.0 OBJECTIVE : To set up a standardized general procedure to check and calibrate the air sampler. 2.0 SCOPE : This SOP is applicable for calibration and checking the status of the DUO SAS SUPER 360 air sampler. 3.0 RESPONSIBILITY 3.1 Sr. Officer/ Officer shall be responsible for carrying out the procedure. 3.2 Overall ...

1.0 OBJECTIVE To set up a procedure for the operation, cleaning and calibration of Dose Uniformity Sampling Apparatus (DUSA) for DPI. 2.0 SCOPE This SOP is applicable for operation, cleaning and calibration of Dose Uniformity Sampling Apparatus (DUSA) for DPI. 3.0 RESPONSIBILITY 3.1 Operating personnel ...

1.0 OBJECTIVE : To provide a written procedure for the preparation of 70% Isopropyl alcohol . 2.0 SCOPE : This procedure is applicable for the preparation of 70% Isopropyl alcohol used as disinfectant in (Company Name). 3.0 RESPONSIBILITY 3.1 Microbiologist/ QC officer shall be responsible to carry ...

1.0 OBJECTIVE To provide general guidance in the technique of pipetting during analysis. 2.0 SCOPE To pipette liquid samples accurately with pipettes that are calibrated to deliver. 3.0 RESPONSIBILITY 3.1 All the analysts are responsible to follow the procedure described in this SOP. 3.2 Overall responsibility ...

1.0 OBJECTIVE : To set up a procedure for the operation and cleaning of Stability Chamber-VII (Instrument ID: QC/154). 2.0 SCOPE : This SOP is applicable for the operation and cleaning of Stability Chamber-VII (Instrument ID: QC/154). 3.0 RESPONSIBILITY 3.1 Operating personnel is responsible for carrying ...

1.0 OBJECTIVE To describe the procedure for operation, cleaning and maintenance of the sampling booth. 2.0 SCOPE This procedure is applicable for the operation, cleaning and maintenance of sampling booth located in warehouse and dedicated for sampling of materials. 3.0 RESPONSIBILITY 3.1 QC Officer ...

1.0 OBJECTIVE To set up a procedure for the operation and calibration of Digital Ultrasonic Bath. 2.0 SCOPE This SOP is applicable for the operation and calibration of Digital Ultrasonic Bath, Model No. : Power Sonic -510 (Eq. ID: QC/167) in the Quality Control Department of (Company Name). 3.0 RESPONSIBILITY 3.1 ...

1.0 OBJECTIVE To set up a general guideline for the operation, cleaning and calibration of Refractometer. 2.0 SCOPE This SOP is applicable for operation, cleaning and calibration of Refractometer (Eq. ID.: QC/156). 3.0 RESPONSIBILITY 3.1 Operating personnel is responsible for carrying out the procedure. 3.2 ...