OBJECTIVE The Objective of this SOP is to describe the procedure for operation of Chiller plant & Monitor the Performance of the Chiller plant. SCOPE This SOP is applicable for the operation of Chiller plant. Installed in Utility at RESPONSIBILITY 1 The Plant Operator shall be responsible for: 1.1 ...

OBJECTIVE: To describe the procedure for checking the quality of Stainless Steel (SS). SCOPE: This SOP is applicable for the checking the quality of Stainless Steel (SS) installed RESPONSIBILITY: 1 The Maintenance Engineer shall be: 1.1 Responsible for procedure for the checking the quality of SS. ACCOUNTABILITY: ...

Computer System Validation (CSV) is the process for ensuring that a computer system meets its intended use and complies with regulatory requirements. GAMP 5 is a set of guidelines published by (ISPE) for CSV in the life sciences industry. GAMP 5 categorizes computer systems in a way that helps determine ...

OBJECTIVE: The Objective of this SOP is to describe the procedure for Airflow pattern checking. SCOPE: This SOP is applicable for the describe the procedure for Airflow pattern checking 4.0 RESPONSIBILITY: 4.1 The Maintenance Engineer shall be responsible: 4.1.1 For Airflow pattern checking. 4.1.2 For ...

OBJECTIVE: The purpose of this SOP is: To describe the procedure for Calibration Of Hour Meter being used in various departments. SCOPE: This SOP is applicable for the calibration of Hour meter installed in manufacturing & other Facilities of RESPONSIBILITY: 1 The Maintenance Engineer shall be: 1.1 ...

GxP is a set of regulations and quality guidelines formulated to ensure the safety of life sciences products while maintaining the quality of processes throughout every stage of manufacturing, control, storage, and distribution. GxP is a general abbreviation for the “good practice” quality ...

OBJECTIVE: The Objective of this SOP is to describe the procedure for checking the Earthing continuity. SCOPE: This SOP is describing the procedure for checking the Earthing continuity. RESPONSIBILITY: 1 The Maintenance Engineer shall be: 1.1 Responsible for checking the Earthing continuity. 1.2 Responsible ...

1. OBJECTIVE • To describe the procedure for handling of deviations. • To lay down the investigation and control procedure for deviation, which can affect the quality of the product, to enable a suitable and prompt action. 2. SCOPE • This SOP is applicable for any deviation in an established process ...

1.0 OBJECTIVE: To lay down a procedure for disposal of air filters. 2.0 SCOPE: This SOP is applicable to all filters used at . 3.0 RESPONSIBILITY: Technician / Engineer. Head Of Department – Engineering. 4.0 PROCEDURE: 4.1 Take the filter to be disposed in polythene bag to `Scrap Yard’. 4.2 Label ...

1.0 OBJECTIVE: To lay down procedure of BMS operation & alarm handling of Air handling Unit. 2.0 SCOPE: This SOP is applicable for carrying out BMS operation of HVAC System equipment . 3.0 RESPONSIBILITY: Operator/Operating Person/Executive Engineering 3.1 BMS operator responsible for 3.1.1 To operate ...