OBJECTIVE: The Objective of this SOP is To describe the procedure for Calibration Of Pressure Gauges. SCOPE: This SOP is applicable for the calibration of Pressure Gauge installed in manufacturing & Other Facilities of RESPONSIBILITY: The Maintenance Engineer shall be: Responsible for Calibration ...

OBJECTIVE: To laydown standard procedure for cleaning of AHU FILTERS. SCOPE: This SOP covers all the microvee filters for all AHU. RESPONSIBILITY: Contractor, Operator, Officer and Executive. ACCOUNTABILITY: Head – Engineering. REFERENCES: In house ATTACHMENTS: Attachment-1 FILTER CLEANING RECORD PROCEDURE 1.0 ...

The development and production of drugs within the pharmaceutical industry requires manufacturers to quantify their components, and this entails the use of an analytical method that must first be validated in order to be implemented. Validation refers to documented evidence that a process is suitable ...

1. OBJECTIVE 1.1. Change control is a quality tool and a management to maintain and keep the records of all changes as a history. Changes can be related to facility, documentation, system, equipment, instrument, procedure, layouts and products etc. 1.2. To lay down a procedure to describe the handling ...

1. Objective 1.1. To lay down a procedure for data integrity as part of quality management system. 1.2. To establish guidelines and procedures to ensure data integrity in regulatory activities. 1.3. To prevent unauthorized access, loss, alteration, or falsification of data throughout the regulatory processes, ...

by Andrea Vignoni, Pharma CQV Expert & Senior Consultant Validation is an integral part of the pharmaceutical industry involving two key phases that work in tandem to ensure the highest quality and compliance standards. These phases, commissioning and qualification, are carefully executed to guarantee ...

1.0 OBJECTIVE 1.1 To describe a procedure for the preventive maintenance of autoclave. 2.0 SCOPE 2.1 This procedure applies to the Engineering department. 3.0 RESPONSIBILITY 3.1 Engineering 4.0 ACCOUNTABILITY 4.1 Plant Head 5.0 REFERENCE 5.1 In-house. 6.0 PROCEDURE 6.1 Procedure for mechanical work: 6.1.1 ...

1.0 OBJECTIVE 1.1 To describe a procedure for the calibration of pressure gauge. 2.0 SCOPE 2.1 This procedure applies to the Engineering department. 3.0 RESPONSIBILITY 3.1 Engineering 4.0 ACCOUNTABILITY 4.1 Plant head 5.0 REFERENCE 5.1 In-house. 6.0 PROCEDURE 6.1 Close the line in which Pressure Gauge ...

1.0 OBJECTIVE: To lay down a procedure for Operation of Boiler. 2.0 SCOPE: This SOP is applicable for Operation of Boiler at …………. 3.0 RESPONSIBILITY: Officer / Executive – Engineering 4.0 ACCOUNTABILITY: Head – Engineering 5.0 DEFINITION: Not Applicable 6.0 PROCEDURE: 6.1 PRE STARTUP CHECKS: 6.1.1 ...

1.0 OBJECTIVE: To lay down a procedure for Civil Work Permit. 2.0 SCOPE: This SOP is applicable for Civil Work Permit for any maintenance in the plant premises. 3.0 RESPONSIBILITY: Officer / Executive – EHS 4.0 ACCOUNTABILITY: Head – EHS 5.0 ABBREVIATIONS: SOP Standard Operating Procedure No. ...