SOP for Noise Level Measurement

OBJECTIVE: 2.1 The Objective of this SOP is to describe the procedure for Noise level measurement. SCOPE: 3.1 This SOP is to describe the procedure for Noise level measurement. RESPONSIBILITY: 4.1 The Maintenance Engineer shall be: 4.1.1 Responsible for checking the noise level measurement. 4.1.2 Responsible ...

SOP for Integrity Testing of HEPA Filter

OBJECTIVE: The Objective of this SOP is: 1 To describe the procedure for integrity testing of High Efficiency Particulate Air (HEPA) filters being used in Clean Room, De-pyrogenating Tunnel, Laminar Air Flow (LAF) unit and supply/exhaust air unit connected to the critical processes (wherever installed). 2 ...

SOP for Operation of Chiller Plant

OBJECTIVE The Objective of this SOP is to describe the procedure for operation of Chiller plant & Monitor the Performance of the Chiller plant. SCOPE This SOP is applicable for the operation of Chiller plant. Installed in Utility at RESPONSIBILITY 1 The Plant Operator shall be responsible for: 1.1 ...

SOP for Verification of Stainless Steel Quality

OBJECTIVE: To describe the procedure for checking the quality of Stainless Steel (SS). SCOPE: This SOP is applicable for the checking the quality of Stainless Steel (SS) installed RESPONSIBILITY: 1 The Maintenance Engineer shall be: 1.1 Responsible for procedure for the checking the quality of SS. ACCOUNTABILITY: ...

SOP for Air Flow Pattern Checking

OBJECTIVE: The Objective of this SOP is to describe the procedure for Airflow pattern checking. SCOPE: This SOP is applicable for the describe the procedure for Airflow pattern checking 4.0 RESPONSIBILITY: 4.1 The Maintenance Engineer shall be responsible: 4.1.1 For Airflow pattern checking. 4.1.2 For ...

SOP for Calibration of Hour Meter

OBJECTIVE: The purpose of this SOP is: To describe the procedure for Calibration Of Hour Meter being used in various departments. SCOPE: This SOP is applicable for the calibration of Hour meter installed in manufacturing & other Facilities of RESPONSIBILITY: 1 The Maintenance Engineer shall be: 1.1 ...

SOP for Checking the Earth Continuity

OBJECTIVE: The Objective of this SOP is to describe the procedure for checking the Earthing continuity. SCOPE: This SOP is describing the procedure for checking the Earthing continuity. RESPONSIBILITY: 1 The Maintenance Engineer shall be: 1.1 Responsible for checking the Earthing continuity. 1.2 Responsible ...

SOP for Deviation Handling

1. OBJECTIVE • To describe the procedure for handling of deviations. • To lay down the investigation and control procedure for deviation, which can affect the quality of the product, to enable a suitable and prompt action. 2. SCOPE • This SOP is applicable for any deviation in an established process ...

SOP for Disposal of Air Filters

1.0 OBJECTIVE: To lay down a procedure for disposal of air filters. 2.0 SCOPE: This SOP is applicable to all filters used at . 3.0 RESPONSIBILITY: Technician / Engineer. Head Of Department – Engineering. 4.0 PROCEDURE: 4.1 Take the filter to be disposed in polythene bag to `Scrap Yard’. 4.2 Label ...

SOP for BMS Operation & Alarm Handling

1.0 OBJECTIVE: To lay down procedure of BMS operation & alarm handling of Air handling Unit. 2.0 SCOPE: This SOP is applicable for carrying out BMS operation of HVAC System equipment . 3.0 RESPONSIBILITY: Operator/Operating Person/Executive Engineering 3.1 BMS operator responsible for 3.1.1 To operate ...
© 2024 Pharmaceuticals Index. All rights reserved.