OBJECTIVE: The Objective of this SOP is To describe the procedure for Calibration Of Pressure Gauges.
SCOPE: This SOP is applicable for the calibration of Pressure Gauge installed in manufacturing & Other Facilities of
RESPONSIBILITY:
The Maintenance Engineer shall be:
Responsible for Calibration ...
1.0 OBJECTIVE
1.1 To describe a procedure for the calibration of pressure gauge.
2.0 SCOPE
2.1 This procedure applies to the Engineering department.
3.0 RESPONSIBILITY
3.1 Engineering
4.0 ACCOUNTABILITY
4.1 Plant head
5.0 REFERENCE
5.1 In-house.
6.0 PROCEDURE
6.1 Close the line in which Pressure Gauge ...
When compared to a traceable reference, calibration ensures that the value provided by a measuring device is precise and repeatable. However, it cannot be assumed that the instrument will always deliver precise and repeatable readings after it has been calibrated. Therefore, instrument recalibration ...
1.0 OBJECTIVE: To describe a procedure for the calibration of pressure gauge.
2.0 SCOPE: This procedure applies to the Engineering department.
3.0 RESPONSIBILITY: Engineering
4.0 ACCOUNTABILITY: Plant head
5.0 REFERENCE: In-house.
6.0 PROCEDURE
6.1 Close the line in which Pressure Gauge is installed ...
Objective: To provide guidelines for calibration of mini-check check weight.
Scope: This procedure is applicable for calibration of check weight installed in MDI production area at (Company Name).
Responsibility:
1. Concerned department shall be responsible to perform the activity as per procedure.
2. ...
Objective : To set up a general guideline for the operation and cleaning of memmert Oven.
Scope : This SOP is applicable for the operation and cleaning of memmert Oven.
Responsibility:
=>> Operating personnel is responsible for carrying out the procedure.
=>> Overall responsibility for training, ...
Objective: To establish a standard procedure for calibration of Timer.
Scope: This procedure is applicable for calibration of all Timers in BPL, Track-II.
Responsibility: Engineering Officer shall be responsible to follow the procedure strictly.
Accoutability: Head of Engineering.
Precautions:
1. ...
Objective: To establish a standard procedure for calibration of rpm.
Scope: This procedure is applicable for rpm calibration with digital Tachometer (photo/contact) for all rotating parts/equipments installed in (Company Name).
Responsibility: Engineering Officer shall be responsible to follow the procedure ...